unisonic technologies co., ltd ug1 n120 preliminary insulated gate bipolar transistor www.unisonic.com.tw 1 of 3 copyright ? 20 14 unisonic technologies co., ltd qw - r207 - 028 .a 5.3 a , 1200 v npt series n- channel igbt ? description the utc ug1n120 is a npt series n- channel igbt , it uses utc ? s advanced technology to provide the customers with a minimum on - state resistance , etc . the utc ug1n120 is suitable for ac and dc motor controls, power supplies, and drivers for solenoids, relays and contactors , etc. ? features * low conduction loss * short circuit r ating ? symbol gate emitter collector to-220 1 ? ordering information order ing number package pin assign ment packing lead free halogen free 1 2 3 ug 1 n120 l - ta3 - t ug 1 n120 g - ta3 - t to - 220 g c e tube note: pin assignment: g: gate c: collector e: emitte r UG1N120L-TA3-T (1)packing type (2)package type (1) t: tube (2) ta3: to-220 (3) l: lead free, g: halogen free and lead free (3)green package ? marking utc ug 1 n 120 l: lead free g: halogen free data code lot code 1
ug1 n120 preliminary insulated gate bipolar transistor unisonic technologies co., ltd 2 of 3 www.unisonic.com.tw qw - r207 - 028 .a ? absolute maximum rating (t c =25 c , un less otherwise specified) parameter symbol rating s unit collector to emitter voltage b v ces 1200 v gate to emitter voltage continuous v ges 20 v gate to emitter voltage pulsed v gem 30 v collector current continuous t c =25c i c 5.3 a t c =110c 2.7 a c ollector current pulsed (note 1) i cm 6 a power dissipation total at t c =25c p d 60 w power dissipation derating t c >25c 0.476 w/c forward voltage avalanche energy (note 2) e av 10 mj short circuit withstand time (note 3) at v ge =15v t sc 8 s short circ uit withstand time (note 3) at v ge =12v t sc 13 s operating junction temperature range t j - 55~+1 50 c storage temperature range t stg - 55~+1 50 c note s: 1. absolute maximum ratings are those values beyond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device operation is not implied. 2 . pulse width limited by maximum junction temperature. 3. i ce =7a, l=400 h, v ge =15v, t j =25 c. 4. v ce(pk) =840v, t j =125 c , r g =82 ? . ? thermal characteristics parame ter symbol rating s unit junction to case j c 2.1 c /w ? electrical characteristics (t c =25c , unless otherwise specified) parameter symbol test conditions min typ max unit collector to emitter breakdown voltage bv ces i c =250a, v ge =0v 1200 v emitter to c ollector breakdown voltage bv ecs i c =10ma, v ge =0v 15 v colle ctor to emitter leakage current i ces v ce =1200v t c =25 c 250 a t c =125 c 20 a t c =150 c 1.0 ma collector to emitter saturation voltage v ce(sat) i c =1 . 0a, v ge =15v t c =25c 2. 5 2. 9 v t c =150 c 3. 8 4. 3 v gate to emitter threshold voltage v ge(th) i c = 5 0a, v ce =v ge 6.0 7.1 v gate to emitter leakage current i ges v ge =20v 250 na switching soa ssoa t j =150c, r g = 82 ?, v ge =15v, l= 2m h, v ce(pk) =1200v 6 a gate to emitter plateau voltage v gep i c =1 . 0a, v ce =600v 9.2 v on - state gate charge q g(on) i c =1 . 0a, v ce =600v v ge =15v 14 20 nc v ge =20v 15 21 nc current turn - on delay time t d(on)i igbt and diode at t j =25c i ce =1 .0 a, v ce = 30 v, v ge =15v, r g = 82? 200 ns current rise time t rl 470 ns current turn - off delay time t d(off)i 118 ns current fall time t fl 200 ns
ug1 n120 preliminary insulated gate bipolar transistor unisonic technologies co., ltd 3 of 3 www.unisonic.com.tw qw - r207 - 028 .a utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
